标准更易维护 晟江 API1004巴特干断阀专为罐装运输车辆的下装 / 卸油作业设计, 适用石油等各类危险品。设计生产与测试均符合
API1004巴特干断阀设计 API RP1004与BS EN 13083标准要求。晟江API1004巴特干断阀结构设计合理,更换部件等操作减半快速, 能实现现
符合国际行业标准,结构 场维护作业。重要磨损部件如密封件、 O型圈、 助力扳手和操作手柄、 阀杆密封面以及应力弹簧等均能在现场单人操
设计更简便易维护 作,快速完成。
Standardization and
optimization SME APi1004 coupler for bottom loading and unliading is designed for tank vehicles for transport of petroleum and
dangerous goods.lt is designed, produced and tested in compliance with API RP 1004 and BS EN 13083.The coupler
is better constructed with inbuilt pressure-loaded springs and integrated poppet valve,giving it less chance of damage
from exterior engagement.On the other hand, that does not give it a harder time to replace all worn -out parts and
seals, say loading spring,grab handle,poppet, wear bumperan nose seal or internal O-rings.
安全更可靠 晟江API1004巴特干断阀含自锁装置,能有有效防止悬空开启泄露的事故风险。我们将自锁、应力和止回装置合并置于
API1004巴特干断阀 本体内部,产品一体性更高,结构更稳固。API1004巴特采用优质的推杆式止回密封,保证高流量的同时尽可能减少压降
自锁与应力 止回结构 大小。 密封结构经过密闭对接启闭测试,密封溢出不超过 5cm³。 冲击水压实验对应力结构考验, 确保 5倍于工作压力下
紧固稳定操作 结构稳定, 阀门安全无误。
安全更可靠
Minimising the risk of
accidental engagement
SME APi1004 coupler incorporates dry-break svheme with additton safety interlocks pre-venting it from
accidental disapartment at risk The coupler applies poppet valce comstructio,minimzizing pressure loss
an keeping a high VOlume of flow rate.The structure is checked per standard with mutiple type tests
including rated and burst test on the body,surge test on the sealing performance.Liq-uid
loss is checkedto see 5cm³/avg.on the consecutive disconnects.
API1004巴特干断阀,配套罐车 晟江API1004巴特具备快速通断与内置阀门,适用汽油等各类危险品。把手有安全保护即无公头连接时把手处于
APi Coupler with integrated 自锁紧状态,无法打开。配拉断阀与装卸臂总装使用。 加油装卸臂和拉断阀
check valve and interlock
APi Coupler with integrated
check valve and interlock
SME APi1004 Coupler is a dry-break connection with integrated valve construction,fitted
for petroleum and gasoline. Interlock handle is applied making sure the coupler cannot
be opened without the adapter in position.